Engineering, 11.04.2020 02:42 glori1647

The following system of equations is designed to determine concentrations (the c’s in $$g/m^3$$) in a series of coupled reactors as a function of the amount of mass input to each reactor (the right-hand sides in g/day), $$

15c_1 - 3c_2 – c_3 = 3800,
-3c_1+ 18c_2 - 6c_3 = 1200,
-4c_1 – c_2 + 12c_3 = 2350$$

Determine the matrix inverse. Use the inverse to determine the solution. Determine how much the rate of mass input to reactor 3 must be increased to induce a $$10 g/m^3$$ rise in the concentration of reactor

1. How much will the concentration in reactor 3 be reduced if the rate of mass input to reactors 1 and 2 is reduced by 500 and 250 g/day, respectively?

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

Engineering, 04.07.2019 18:20, DroctorWellsfan

Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above

Answers: 1

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

You know the right answer?

The following system of equations is designed to determine concentrations (the c’s in $$g/m^3$$) in...