Modify your Working Model (WM) slider crank simulation as detailed below and on the
following page. Attach a screen shot of your WM mechanism. Be certain to shift the centroid
for link 3.

a) Use a motor to drive the crank at constant 1000 rpm for R = 0.985 inch and L = 4.33 inch.
b) Use a statically balanced crank (G2 at A).
c) Modify your connecting rod and piston to use inertial data from H10.

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Afour cylinder four-stroke in-line engine has a stroke of 160mm, connecting rod length of 150mm, a reciprocating mass of 3kg and its firing order is 1-3-4-2. the spacing between cylinders is 100mm. i. show that the engine is in balance with regard to the primary inertia forces and primary 3. a and secondary inertia couples. li determine the out of balance secondary inertia force ii. propose ways of balancing this out of balance force and discuss the challenges that will arise