Engineering, 08.04.2020 02:16 leshayellis1591
ShoppingBay is an online auction service that requires several reports. Data for each auctioned item includes an ID number, item description, length of auction in days, and minimum required bid. Design a flowchart or pseudocode for the following:
a. A program that accepts data for one auctioned item. Display data for an auction only if the minimum required bid is over $100.00.
b. A program that continuously accepts auction item data until a sentinel value is entered and displays all data for auctions in which the minimum required bid is over $100.00.
c. A program that continuously accepts auction item data and displays data for every auction in which there are no bids yet (in other words, the minimum bid is $0.00) and the length of the auction is one day or less.
d. A program that continuously accepts auction data and displays data for every auction in which the length is between 7 and 30 days inclusive.
e. A program that prompts the user for a maximum required bid, and then continuously accepts auction data and displays data for every auction in which the minimum bid is less than or equal to the amount entered by the user.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20, maciemarklin79981
A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?
Answers: 3
Engineering, 04.07.2019 19:10, pjgolden04
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
Engineering, 04.07.2019 19:20, amandaaarmentaa
Acircular pipe of 30mm outside diameter is placed in an airstream at 30 c and latm pressure. the air moves in cross flow over the pipe at 20 m/s, while the outer surface of the pipe is maintained at 110 c. what is the drag force exerted on the pipe per unit length? what is the rate of heat transfer from the pipe per unit length?
Answers: 1
You know the right answer?
ShoppingBay is an online auction service that requires several reports. Data for each auctioned item...
Questions in other subjects:
Mathematics, 21.07.2019 17:40
Health, 21.07.2019 17:40
