Engineering, 08.04.2020 01:32 jacckiie5176

A three-phase, 60 Hz, synchronous wound rotor machine acting as generator is observed to have a terminal voltage of 460 Vrms and a magintude terminal current of 140 Arms at a power factor of 0.88 lagging. The field current under this operation is 50 A. The synchronous reactance is 1.0 and you can assume the armature resistance to be negligible. Analytically find:

(a) 10pts. The internal voltage of the machine
(b) 10pts. The magnitude of the field-to-armature mutual inductance.
(c) 10pts. The electrical power output in both kW and HP.
(d) 5pts. Draw the phasor diagram of the internal voltage, the machine line voltage drop, and the terminal voltage of the machine.
(e) 5pts. What is the electrical phase angle difference value between the magnetic axis of Or and Ff?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, Candi9697

A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.

Answers: 2

continue

Engineering, 04.07.2019 18:20, xcapo1x

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.

Answers: 2

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

Engineering, 04.07.2019 19:10, nbug2121

Arigid tank contains 10 kg of air at 137 kpa (abs) and 21°c. more air is added to the tank until the pressure and temperature rise to 242 kpa (abs) and 32°c, respectively. determine the amount of air added to the tank. [r-0.287 kj/kg k]

Answers: 3

continue

You know the right answer?

A three-phase, 60 Hz, synchronous wound rotor machine acting as generator is observed to have a term...