Engineering, 07.04.2020 23:26 nickocasamplonp6mlob

A grader will be used to maintain 3 mils of haul road. It is estimated the work will require removing ruts with two passes in first gear, leveling the road with two passes in second gear, and final shaping of the road with three passes in fourth gear. Use an efficiency factor of 60%. Grader speeds are provided in the chart. Estimate the time requirement for this task.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, cowgyrlup124

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

Answers: 1

continue

Engineering, 03.07.2019 14:10, kayabwaller4589

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Answers: 3

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, skpdancer1605

Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2

Answers: 3

continue

You know the right answer?

A grader will be used to maintain 3 mils of haul road. It is estimated the work will require removin...