Engineering, 07.04.2020 22:13 astultz309459
2. A pump for a pipe system has initial cost of $4,700 and efficiency of 66%. The fluid being transported in the system is 30% propylene glycol solution. The propylene glycol is flowing at 300 gpm with average temperature of 40ºF. At this condition, the head required from the pump is 37 ft. The system operates continuously all year long with an estimated 10% downtime for maintenance and repair. The cost of electricity $0.11/kWh. The system is expected to last for 30 years and provide a rate of return of the 18%. Show the annual cost of the pump. (rho = 64.304 lbm/ft3)
Answers: 3
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
You know the right answer?
2. A pump for a pipe system has initial cost of $4,700 and efficiency of 66%. The fluid being transp...
Questions in other subjects:
Mathematics, 11.11.2021 14:50
Mathematics, 11.11.2021 14:50
