Engineering, 07.04.2020 21:50 lashaaungas

Which shows the correct substitution of the values a, b, and c from the equation –2 = –x + x2 – 4 into the quadratic formula? Quadratic formula: x = StartFraction negative b plus or minus StartRoot b squared minus 4 a c EndRoot Over 2 a EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 4) EndRoot Over 2(1) EndFraction x = StartFraction negative 1 plus or minus StartRoot 1 squared minus 4 (negative 1)(negative 4) EndRoot Over 2(negative 1) EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 4) EndRoot Over 2(1) EndFraction x = StartFraction negative (negative 1) plus or minus StartRoot (negative 1) squared minus 4 (1)(negative 2) EndRoot Over 2(1) EndFraction

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 18:10, juansoto227711

Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery

Answers: 2

continue

Engineering, 04.07.2019 18:20, moneywaydaedae

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

You know the right answer?

Which shows the correct substitution of the values a, b, and c from the equation –2 = –x + x2 – 4 in...