Engineering, 07.04.2020 20:16 jurnee77
Assign rateMPH with the corresponding rate in miles per hour given a user defined rateKPH, which is a rate in kilometers per hour. Use the local function KilometersToMiles. Your Solution g function distanceMiles = CalculateDistance(timeHours, rateKPH) % timeHours: Time in hours A % rateKPH: Rate in kilometers rateMPH = rateKPH; % Call KilometersToMiles function (below) to assign % rateMPH with the corresponding speed in miles per hour distanceMiles = rateMPH * timeHours; end % Do not modify the function below function milesValue = KilometersToMiles(KilometersValue) milesValue = KilometersValue * 0.6213712; 15 end Code to call your function when you click Run Calculate distance(1, 40)
Answers: 1
Other questions on the subject: Engineering
Engineering, 04.07.2019 16:10, TheOriginalMeyah
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Assign rateMPH with the corresponding rate in miles per hour given a user defined rateKPH, which is...
Questions in other subjects:
English, 18.03.2020 22:10
English, 18.03.2020 22:11
