Engineering, 07.04.2020 16:01 adaneri1234

At t = 0, a cube of pure Marylandium (Md) 5 cm on each side is put into a furnace at 1000 °C with a carbon (C) atmosphere at a concentration of 0.1wt%. The diffusion coefficient for C in Md at this temperature is 2 × 109 m2 /s. The density of C is 2.25 g/cm3 and Md is 8 g/cm3 . (a) Sketch the system in one dimension (1D), indicating the materials, locations, variables, and direction of atomic motion. (b) Make a sketch of the C concentration profile in the material at t = 0 clearly labeling the x and y axes with values, units and what is represented. (c) Add a qualitative sketch of the C concentration profile after a short time t1. (d) Add a qualitative sketch of the C concentration profile at a longer time t2.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, abdirahmansoloman

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

continue

Engineering, 04.07.2019 18:10, keigleyhannah30

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Answers: 3

continue

Engineering, 04.07.2019 19:10, Mimidj9279

The sum of the normal stresses does not change as the stress state rotates through an angle. a)-trune b)- false

Answers: 2

continue

Engineering, 04.07.2019 19:20, qurreab26

A5 kg block of fe is dropped into a very large vat of water. the fe and water initial temperatures are 95 and 25 c, respectively. the fe final temperature is 25 c and the water can be treated as a thermal reservoir,. treated as a thermal reservoir take the water to be the system and determine the entropy generation. report vour answer in kj/k.

Answers: 1

continue

You know the right answer?

At t = 0, a cube of pure Marylandium (Md) 5 cm on each side is put into a furnace at 1000 °C with a...