subject
Engineering, 04.04.2020 14:15 SMURFETTE86

An object of irregular shape 1 m long maintained at a constant temperature of 100 degree C is suspended in an airstream having a free stream temperature of 0 degree C, a pres­sure of 1 atm, and a velocity of 120 m/s. The air tempera­ture measured at a point near the object in the airstream is 80 degree C. A second object having the same shape is 2 m long and is suspended in an airstream in the same manner. The air free stream velocity is 60 m/s. Both the air and the object are at 50 degreeC, and the total pressure is 1 atm. A plastic coating on the surface of the object is being dried by this process. The molecular weight of the vapor is 82, and the saturation pressure at 50 degree C for the plastic material is 0.0323 atm. The mass diffusivity for the vapor in air at 50degree C is 2.60 x 10^-5 m^2/s.

a. For the second object, at a location corresponding to the point of measurement on the first object, deter­mine the vapor concentration and partial pressure.

b. If the average heat flux q is 2000 W/m^2 for the first object, determine the average mass flux n A(kg/s*m^2) for the second object.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
image
Engineering, 04.07.2019 18:20, esmemaluma00
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
image
Engineering, 04.07.2019 19:10, nbunny7208
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces. a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
image
Engineering, 04.07.2019 19:20, justicehernandez
Acarnot refrigerator operates in a room in which the temperature is 21°c and of power when operating. if the food compartment of the refrigerator is consumes 3 kw to be maintained at 2°c, determine (a) the coefficient of performance of the cycle and (b) the rate of heat removal from the food compartment. refrigerator cycle that has a higher coefficient of performance than that of the discussed (e) is it possible to develop a carn ot refrigerator, operating between the same temperature limits? explain
Answers: 2
You know the right answer?
An object of irregular shape 1 m long maintained at a constant temperature of 100 degree C is suspen...

Questions in other subjects:

Konu
English, 24.08.2019 14:50
Konu
History, 24.08.2019 14:50