Engineering, 03.04.2020 22:30 kc22

You are assessing the performance of a CSTR that is 60 m long, 5 m wide, and 2 m deep. It receives 250 m3/d of wastewater with a BOD5 of 325 mg-BOD5/L. The following microbial kinetic constants were determined in the lab: Ks = 76 mg-BOD5/L kd = 0.08 d-1 μm = 1.1 d-1 Y = 0.80 mg-VSS/mg-BOD5 (a) What is the efficiency of the CSTR in terms of BOD5 removal?

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, brooklyn674

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

You know the right answer?

You are assessing the performance of a CSTR that is 60 m long, 5 m wide, and 2 m deep. It receives 2...