Engineering, 02.04.2020 23:05 rntaran2002

Show how to determine the heat duty of the double-pipe heat exchanger from experimental data by performnig an energy balance on one part of the system at the frst set of flow rates. Sketch the system and draw a dashed line around the part for the system on which you will perform th eenergy balance. Carry out the calculation for the data you recorded on the first line of your data tableHeat duty = WData Table: 2 MinutesInner tube 1 (inlet) T hot, in (C) = 40.1Inner tube 1 (ourlet) T hot, out (C) = 37.5Outlet tube 2 (inlet) T cold, in (C) = 28Outlet tube 2 (outlet) T cold, out (C) = 28.3

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:20, cdyshaylia55

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

continue

Engineering, 04.07.2019 19:10, Destinationz

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

continue

You know the right answer?

Show how to determine the heat duty of the double-pipe heat exchanger from experimental data by perf...