Engineering, 02.04.2020 02:55 punkinrichard1oxon2i
Part A What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever beam is fixed at end A (x = 0). A uniform distributed load of 2 kip/ft is applied between A and B (x = 6 ft). A downward 10-kip force is applied at B, and an upward 8-kip force is applied at end C (x = 10 ft). In addition, a clockwise couple moment of 40 kip-ft is exerted at the free end C. What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever beam is fixed at end A (x = 0). A uniform distributed load of 2 kip/ft is applied between A and B (x = 6 ft). A downward 10-kip force is applied at B, and an upward 8-kip force is applied at end C (x = 10 ft). In addition, a clockwise couple moment of 40 kip-ft is exerted at the free end C. −x2 (kip-ft) −x2+14x (kip-ft) −x2+14x+24 (kip-ft) −x2−56 (kip-ft) −x2+24 (kip-ft) −x2+14x−56 (kip-ft)
Answers: 2
Engineering, 04.07.2019 18:10, jojoangelique13
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 06.07.2019 02:30, chickennbutt0730
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Part A What is the correct expression of the internal moment in segment AB? A 10-ft-long cantilever...
Mathematics, 02.02.2022 21:20
Business, 02.02.2022 21:20
History, 02.02.2022 21:20
Mathematics, 02.02.2022 21:20