Engineering, 01.04.2020 05:14 livleluve76
Measurements of drag force are made on a model automobile in a towing tank filled with fresh water. The model length scale is 1/8 that of the prototype. Let FD = f(rho, V, L, μ).
a. State the conditions required to ensure dynamic similarity between the model and prototype.
b. Determine the fraction of the prototype speed in air at which the model test should be made in water to ensure dynamically similar conditions.
c. Measurements made at various speeds show that the dimensionless force ratio becomes constant at model test speeds above Vm = 6 m/s. The drag force measured during a test at this speed is FDm = 193 N. Calculate the drag force expected on the prototype vehicle operating at 97 km/hr in air.
Answers: 2
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, juansoto227711
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
Engineering, 04.07.2019 18:20, kodyclancy
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 19:10, nida7864
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Measurements of drag force are made on a model automobile in a towing tank filled with fresh water....
Questions in other subjects:
History, 04.11.2019 14:31
Chemistry, 04.11.2019 14:31
Mathematics, 04.11.2019 14:31
