Engineering, 31.03.2020 15:15 kakalli9999

Consider a sequential circuit that implements the following function in a self-driving car. Every second, the car's position within the lane is determined with cameras and fed as input to the sequential circuit. Accordingly, the car's steering wheel is moved to one of 2 positions: Left, Right. The car's position can be "Middle of a lane", "Drifting to the right edge of the lane", and "Drifting to the left edge of the lane". If the car is in the "Middle", the steering position is left unchanged. If the car is drifting to one of the edges of the lane, the steering is moved away from the edge, i. e., steering should be moved right if the car is near the left edge of the lane.
a. What are the states for the circuit controlling the steering?
b. What are the inputs to the circuit and what values can those inputs have?
c. Draw the finite state table and finite state diagram for this circuit.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 19:10, ultimateapes

When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?

Answers: 2

continue

Engineering, 04.07.2019 19:10, Lexi5170

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

continue

Engineering, 04.07.2019 19:10, lexie223

Acircular aluminum shaft mounted in a journal is shown. the symmetric clearance gap between the shaft and journal is filled with sae 10w-30 oil at t 30°c. the shaft is caused to turn by the attached mass and cord. develop and solve a differential equation for the angular speed of the shaft as a function of time.

Answers: 2

continue

Engineering, 04.07.2019 19:20, littlepotato10

To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.

Answers: 1

continue

You know the right answer?

Consider a sequential circuit that implements the following function in a self-driving car. Every se...