subject
Engineering, 31.03.2020 02:30 Tetto

A slab-milling operation is carried out on a high-strength steel block that has a specific energy of 1.3 hp*min/in3, a length of 20 in, and a width of 6 in, at a feed of 0.01 in/tooth and a depth of cut of 0.15 in. The cutter rotates at 150 rpm and has a diameter of 3 in with 8 straight cutting teeth. Calculate the material removal rate and the cutting time, and estimate the power required.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, ashleybaber4966
If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79
Answers: 1
image
Engineering, 04.07.2019 18:10, niicoleassssssf
Aflywheel accelerates for 5 seconds at 2 rad/s2 from a speed of 20 rpm. determine the total number of revolutions of the flywheel during the period of its acceleration. a.5.65 b.8.43 c. 723 d.6.86
Answers: 2
image
Engineering, 04.07.2019 18:10, leomessifanboy678
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
image
Engineering, 04.07.2019 18:10, agpraga23ovv65c
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
You know the right answer?
A slab-milling operation is carried out on a high-strength steel block that has a specific energy of...

Questions in other subjects:

Konu
English, 22.02.2021 23:10