Engineering, 31.03.2020 00:40 zitterkoph

A 2.0-in-thick slab is 10.0 in wide and 12.0 ft long. Thickness is to be reduced in three steps in a hot rolling operation. Each step will reduce the slab to 75% of its previous thickness. It is expected that for this metal and reduction, the slab will widen by 3% in each step. If the entry speed of the slab in the first step is 40 ft/min, and roll speed is the same for the three steps.

Calculate:

a) lenghtb) exit velocity of the final slab

Answers: 3

Show answers

Answers

Answer from: Kurlyash

L_f = 26.025 ft

v_f = 51.77 ft/min

Explanation:

Given:-

- The thickness of the slab initially, t_o = 2 in

- The width of the slab initially, w_o = 10 in

- The Length of the slab initially, L_o = 12.0 ft

- The reduction in thickness in each of three steps, r = 75%

- The widening of the slab in each of three steps , m = 3%

- The entry speed vi = 40 ft/min

- The roll speed remains the same

Find:-

a) length

b) exit velocity

Of the final slab

Solution:-

- The final thickness (t_f) after three passes is as follows:

t_f = ( r / 100 )^n * t_o

Where, n = number of passes.

t_f = ( 75 / 100 ) ^3 * ( 2.0 )

t_f = 0.844 in

- The final width (w_f) after three passes is as follows:

w_f = ( m / 100 + 1 )^n * w_o

Where, n = number of passes.

w_f = ( 3 / 100 + 1 ) ^3 * ( 10.0 )

w_f = 10.927 in

- Assuming the Volume of the slab remains the same. Zero material Loss. The final length of slab can be determined:

t_o*w_o*L_o = t_f*w_f*L_f

L_f = ( 2 * 10 * 12 ) / ( 0.844 * 10.927 )

L_f = 26.025 ft

- We can use the volume rate equation as the roll speed remains constant i.e change in rate of volume is zero. Hence, we can write the before and after the 3rd step formulation:

t_i*w_i*v_i = t_f*w_f*v_f

Where, v_i : The entry step speed

v_f : Third step exit speed.

(0.75)^2 * 2 * (1.03)^2 * 10 * 40 = (0.844)*(10.927)*v_f

v_f = 51.77 ft/min

Answer from: Quest

angvrswer:

vfg

grfhrtrhr:

jjj

yjujuju

jujuhuyhyt

bgf

bgr

gbr

bgr

gtr

bgr

gbgbbg

bgg

bbg

bfg

dcwf

fdb

ggb

rfe

gtg

gegte

gff

dfg

gfdsax

cvfbgnh

jmhngf

dsaazxscvb

nmhgb

fvdcsxaz

zxcv

bghn

Answer from: Quest

Oh yes igger daddy filled my loose ahοle with your sweet sweet mсum said ronald mcdonald as he spread his sesame covered mcahοle for thanos. thanos slid his throbbing purple ᑕock in to ronald's a. o screamed ronald as he poor hole was torn to bloody shreds. gunga gingagunga gingagunga gingagunga ginga a space ranger appeared making autistuc noises odio a los negros! said buzz lightyear as he aped them both.

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, anna22684

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

continue

Engineering, 04.07.2019 18:10, alyssabailey7545

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, siri5645

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

continue

You know the right answer?

A 2.0-in-thick slab is 10.0 in wide and 12.0 ft long. Thickness is to be reduced in three steps in a...