Engineering, 30.03.2020 19:21 mandy9386

2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and exposed to a solar radiation flux of sun q′′ =750W/m2 on the other side. The exposed surface has an absorptivity of 0.87 α sun = for solar radiation; that is, 87% of the sun’s energy are absorbed whereas the other 13% are reflected. Assuming that the energy absorbed by the panel is dissipated by both natural convection and radiation (with a surrounding temperature of Tsur=300K, and a surface emissivity of εpanel = 0.85) into the surrounding quiescent air at atmospheric pressure and T[infinity] = 300 K, determine the surface temperature of the panel at steady state.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, caitlynnpatton1208

Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.

Answers: 3

continue

Engineering, 04.07.2019 18:10, wirchakethan23

Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.

Answers: 3

continue

Engineering, 04.07.2019 18:10, nandalabella06

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

2. A thin vertical panel L = 3 m high and w = 1.5 m wide is thermally insulated on one side and expo...