Engineering, 30.03.2020 19:21 paigesyring
Air enters a compressor operating at steady state with pressure of 90 kPa, at a temperature of 350 K, and a volumetric flow rate of 0.6 m3/s. The air exits the compressor at a pressure of 700 kPa. Heat transfer from the compressor to its surrounding occurs at a rate of 30 kJ/kg of air flowing. The compressor power input is 75 kW. Neglecting kinetic and potential energy effects and assuming air to be an ideal gas, find the exit temperature of air.
Answers: 2
Engineering, 04.07.2019 18:10, demarcuswiseman
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 19:10, juneham
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Air enters a compressor operating at steady state with pressure of 90 kPa, at a temperature of 350 K...
English, 01.09.2019 00:10
Mathematics, 01.09.2019 00:10
Social Studies, 01.09.2019 00:10
Chemistry, 01.09.2019 00:10
Mathematics, 01.09.2019 00:10
Social Studies, 01.09.2019 00:10