subject
Engineering, 30.03.2020 18:00 sarrivera579

A stainless-steel wall (AISI 302) is 0.2 m thick with the top surface at a temperature 40°C and the bottom surface at a temperature 100°C. Water, at [infinity] 25°C, flows over the top surface. Find the water flow convection coefficient, the temperature gradient in the wall and the temperature gradient in the water that is in contact with the wall. Assume steady-state conditions and evaluate the properties of the stainless-steel at 400 K.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 15:10, theamandawhite
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
image
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
image
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
image
Engineering, 04.07.2019 18:10, colin774
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
You know the right answer?
A stainless-steel wall (AISI 302) is 0.2 m thick with the top surface at a temperature 40°C and the...

Questions in other subjects:

Konu
Mathematics, 12.09.2021 04:20
Konu
Mathematics, 12.09.2021 04:20