A specimen of 4340 Steel Tempered at 425C is being tested using a single edge notched tension configuration. The estimated Y parameter for the SENT is 2.5. If the specimen is loaded to 60% of the yield strength, what length of starter crack (inches) will cause the specimen to fail by fracture

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]