Engineering, 29.03.2020 23:57 finesser16

ET 344: Industrial Electronics and control
01. A single-phase full wave rectifier is operated from a 120 V, 60 Hz power supply. A 100-ohm
resistive load is connected at the output terminal of the rectifier. Determine-
a. Maximum power that can be delivered by the rectifier?
b. If it is required to obtain an output voltage 60% of the maximum possible output voltage
then calculate-
i. Delay angle of the Thyristor based rectifier
ii. Average output current, and
ili. Average Thyristor current.

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, hadellolo8839

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Answers: 3

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

Engineering, 04.07.2019 19:20, holaadios222lol

Apiping systems consists of 6 m of 6-std type k and 12 m of 4-std type k, both drawn copper tubing. the system conveys ethylene glycol at a rate of 0.013 m3/s. the pressure drop across the system is to be calculated. there are two 90° elbows in the 6-in pipe, a reduction from the 6-in pipe to the 4-in pipe and four 90° elbows in the 4-in pipe. all fittings are soldered (same as flanged) and regular. the inlet and outlet of the system are at the same height.

Answers: 1

continue

You know the right answer?

ET 344: Industrial Electronics and control
01. A single-phase full wave rectifier is operated f...