Engineering, 28.03.2020 03:20 jenkinjack7654
A gas stream contains 4.0 mol % NH3 and its ammonia content is reduced to 0.5 mol % in a packed absorption tower at 293 K and 101300 Pa. The inlet pure water flow is 68.0 kgmol/h and total inlet gas flow is 57.8 kgmol/h. The tower diameter is 0.747 m. The film mass-transfer coefficients are k’ya=0.0739 kgmol/s. m3 .molfrac and k’xa= 0.169 kgmol/s. m3 .molfrac. Using the design methods for dilute gas mixtures,
(a) Calculate the tower height using k’ya.
(b) Calculate the tower height using K’ya.
Answers: 2
Engineering, 04.07.2019 18:20, aly95
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 19:20, natalie2sheffield
Acompressor compresses a gas, a pump compresses a liquid. for a given pressure ratio, why does it take more work to compress a gas in a compressor than a liquid in a pump? a)- for a given pressure ratio the average specific volume for a gas is much higher than the average specific volume for a liquid. b)- there is no difference. the only difference is the amount of heat generated (not work) c)- for a given pressure ratio the average volurge for a gas is much higher than the average volume for a liquid. d)-there is no difference
Answers: 3
A gas stream contains 4.0 mol % NH3 and its ammonia content is reduced to 0.5 mol % in a packed abso...
Social Studies, 19.07.2019 09:30
English, 19.07.2019 09:30
Geography, 19.07.2019 09:30
History, 19.07.2019 09:30
Physics, 19.07.2019 09:30
Mathematics, 19.07.2019 09:30