Engineering, 27.03.2020 02:25 debrielcalderon
R axes and include units).•Plot the input signal with a solid line.•With a dashed line, plot the desired curve associated with a filter to remove noise from the input signal.•With respect to the dashed line, indicate where the filter is blocking and where it is passing the signal. a.Measurement signal between 5.0 MHz and 25 MHz; noise at 175 kHz and 150 MHz. b.Measurement signal at 250 kHz; noise at 60 Hz. c.Measurement signal from 100 Hz to 1 MHz; noise at 600 kHz. d.Measurement signal between 1 kHz an
Answers: 2
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10, wirchakethan23
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i. d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
R axes and include units).•Plot the input signal with a solid line.•With a dashed line, plot the des...
Social Studies, 08.12.2019 04:31
Social Studies, 08.12.2019 04:31
Biology, 08.12.2019 04:31
History, 08.12.2019 04:31
History, 08.12.2019 04:31
English, 08.12.2019 04:31
Health, 08.12.2019 04:31