Engineering, 24.03.2020 22:41 lovelylid6969
) A brick of clay is being dried in a batch dryer using constant drying conditions. You have been asked to determine the amount of time it will take to dry the clay from a total moisture content of 0.6 to a free moisture content of 0.08. You are given the following information: 1. Previously, the drier was able to dry a piece of clay with a total moisture content of 0.64 in 8 hours and 80% of the drying occurred with a constant rate. 2. The equilibrium moisture content is 0.1. 3. The critical free moisture content is 0.15.
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 14:10, cowgyrlup124
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, caitlynnpatton1208
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
You know the right answer?
) A brick of clay is being dried in a batch dryer using constant drying conditions. You have been as...
Questions in other subjects:
Biology, 16.07.2019 15:40
English, 16.07.2019 15:40
Biology, 16.07.2019 15:40
History, 16.07.2019 15:40
Mathematics, 16.07.2019 15:40
History, 16.07.2019 15:40
