Engineering, 24.03.2020 17:37 zoieisabella
Design an interface between an FM4E and a motor that has Kt = 1 Nm/A and Rwinding = 10 and needs 12 V. The interface should allow the FM4E to turn the motor on or off. Data sheets for transistors that might prove useful are located in the Files section of Canvas in the Data Sheets folder. Be specific about any components needed in your interface. Show your calculations and draw a schematic for your interface.
Answers: 3
Engineering, 04.07.2019 18:10, redrosesxx
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:20, krojas015
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Design an interface between an FM4E and a motor that has Kt = 1 Nm/A and Rwinding = 10 and needs 1...
Mathematics, 11.06.2021 14:00
English, 11.06.2021 14:00
Mathematics, 11.06.2021 14:00