Engineering, 24.03.2020 04:53 sakinahunt
Assign to maxSum the max of (numA, numB) PLUS the max of (numY, numZ). Use just one statement. Hint: Call FindMax() twice in an expression.
#include
double FindMax(double num1, double num2) {
double maxVal = 0.0;
// Note: if-else statements need not be understood to complete this activity
if (num1 > num2) { // if num1 is greater than num2,
maxVal = num1; // then num1 is the maxVal.
}
else { // Otherwise,
maxVal = num2; // num2 is the maxVal.
}
return maxVal;
}
int main(void) {
double numA = 5.0;
double numB = 10.0;
double numY = 3.0;
double numZ = 7.0;
double maxSum = 0.0;
/* Your solution goes here */
printf("maxSum is: %.2f\n", maxSum);
return 0;
}
Answers: 2
Engineering, 04.07.2019 18:10, ahmedeldyame
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
Engineering, 04.07.2019 18:10, settasav9641
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10, niyawilliams23
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Assign to maxSum the max of (numA, numB) PLUS the max of (numY, numZ). Use just one statement. Hint:...
English, 15.10.2019 22:00