Engineering, 23.03.2020 22:26 SkyDoki

I was grumpy with her when she came over because she forgot something we planned to do. I offered to pick her up down town while her car was being worked on. We took the kids to the zoo. There were a few moments when I complained about the whole day being gone. For the most part I tried to stay positive, so she did not feel bad about me giving up the day. I told my mom I would help her do her nails. She came over and instead of playing with the kids before bed I helped her get her nails done. Thanked her for helping with dinner. Called and had a nice chat to start the day. a. What was the ratio of confirming to disconfirming messages that I sent? (Note: If you find that your ration of confirming to disconfirming is about equal, you are in trouble. Research shows that it takes between 5 and 16 confirming messages to make up for one disconfirming message!)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:20, aly95

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

continue

Engineering, 04.07.2019 18:20, cristykianpour

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

continue

Engineering, 04.07.2019 18:20, esmemaluma00

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

continue

Engineering, 04.07.2019 18:20, samueltaye

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

continue

You know the right answer?

I was grumpy with her when she came over because she forgot something we planned to do. I offered to...