subject
Engineering, 22.03.2020 21:36 zachzach28280

Match the words with their definitions
- Load-bearing wall
- footings
- Microlam
- Gable
- Joist
- OSB
- Particleboard
- Pitch
- Point load
- Rebar
- Backfill

-Wooden 2 X 8's, 10's, or 12's that run parallel to one another and support a floor or ceiling, and supported in turn by larger beams, girders, or bearing walls.
- A point where a bearing/structural weight is concentrated and transferred to the foundation.
- Includes all exterior walls and any interior wall that is aligned above a support beam or girder
- Plywood substitute made of coarse sawdust that is mixed with resin and pressed into sheets.
- The replacement of excavated earth into a trench around or against a basement/crawl space foundation wall.
- Continuous 8m" or 10" thick concrete pad installed before and supports the foundation wall or monopost
- Ribbed steel bars installed in foundation concrete walls, footers and poured in place concrete structures designed to strengthen concrete.
- The end, upper, triangular area of a home, beneath the roof
- A manufactured 4X8 wood panel made out of 1-2 wood chips and glue. Often used as a substitute for plywood.
- The incline slope of a roof or the ratio of the total width of a house.
- A manufactured structual wood beam. It is constructed of pressure and adhesive wood strands of wood.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, kevin72836
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
image
Engineering, 04.07.2019 18:10, krystabrewer3
What are the two (02) benefits, which may result from a successful implementation of preventive maintenance (pm) program in an organization? (clo3)a)- lean manufacturing b)-overlapping responsibilities c)-the planner is not qualified d)-accurate contractor information e)-reduction in equipment redundancies f)-accurate stores information
Answers: 3
image
Engineering, 04.07.2019 19:10, Destinationz
Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?
Answers: 3
image
Engineering, 04.07.2019 19:10, nani3906
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
You know the right answer?
Match the words with their definitions
- Load-bearing wall
- footings
- Microlam

Questions in other subjects:

Konu
Mathematics, 10.12.2020 04:40
Konu
English, 10.12.2020 04:40
Konu
Computers and Technology, 10.12.2020 04:40