Engineering, 21.03.2020 11:56 akitchen10

The center of a large bar magnet is z = 25 cm from a thin plate of high resistance material 12 cm long, 2.5cm high, and 0.1 cm thick that is connected to a 240 V power supply whose internal resistance is negligible. The bar magnet is perpendicular to the plate. The mobility of charge canners in the thin plate is 3.8 x 10^(-4) (m/s)/(V/m), and the number density of singly charged charge carriers is 3.6 x 10^23 m^(-3). A voltmeter connected precisely vertically across the A thin plate and reads +1.2 x 10^(-5) V. A low-resistance ammeter is in series with the rest of the circuit.
(a) Are the charge carriers electrons or holes?
(b) What is the magnetic deplete moment of the maggots? Include unit. (Enter the magnitude.)
(c) What does the ammeter read, including sign?

Answers: 2

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, makaylashrout77

Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.

Answers: 2

continue

Engineering, 04.07.2019 18:10, lillygrl100

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Answers: 3

continue

Engineering, 04.07.2019 18:20, RiverH246

Air flows over a heated plate àt a velocity of 50m/s. the local skin factor coefficient at a point on a plate is 0.004. estimate the local heat transfer coefficient at this point. the following property data for air are given: density = 0.88kg/m3 , viscosity 2.286 x 10 ^-5 kgm/s , k = 0.035w/mk ,cp = 1.001kj/kgk. use colburn reynolds analogy.

Answers: 1

continue

Engineering, 04.07.2019 19:10, gabigalvis1091

What is the main objective of using reheat rankine cycle?

Answers: 3

continue

You know the right answer?

The center of a large bar magnet is z = 25 cm from a thin plate of high resistance material 12 cm lo...