subject
Engineering, 21.03.2020 03:15 mendezmarco2004

A runway used for landing only is used by two types of aircraft, one with an airspeed of 120 knots (nautical miles/hr) and the other with an airspeed of 150 knots. The length of common approach path is 6 nautical miles. A minimum distance separation of 3 nautical miles must be maintained by aircraft on the common approach path. Runway occupancy time for both types of aircraft is 60 seconds. (a) Use space-time diagrams to determine the time separations (in seconds) at the runway threshold for each aircraft pair. Present your results in matrix form. (b) If 40 percent of the aircraft travel at 120 knots and 60 percent at 150 knots, and the buffer matrix below is used (data in seconds), what is the capacity of the runway in aircraft per hour?

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
image
Engineering, 04.07.2019 18:10, aaliyah80
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 18:20, cristykianpour
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A runway used for landing only is used by two types of aircraft, one with an airspeed of 120 knots (...

Questions in other subjects:

Konu
Mathematics, 30.08.2019 15:30