Engineering, 21.03.2020 02:12 FailingstudentXD
A steam reformer operating at 650C and 1 atm uses propane as fuel for hydrogen production. At the given operating conditions, the reforming reaction can be approximated as a complete reaction with good accuracy, while the shifting reaction is at equilibrium. The equilibrium constant for this reaction is KP=2.03 at 650C and the overall reforming and shifting reactions are endothermic.
(a) Determine the concentrations of water ([H20]) and hydrogen ([H2]) if the concentrations of propane, carbon monoxide and carbon dioxide in the outlet of reformer are 0.005, 0.08 and 0.09 respectively.
(b) Without any calculations, how does increasing the operating temperature of the reformer affect the concentration of hydrogen in the outlet?
(c) What is the maximum hydrogen yield?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, lillygrl100
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10, Candi9697
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:10, mamasbug4285
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
You know the right answer?
A steam reformer operating at 650C and 1 atm uses propane as fuel for hydrogen production. At the gi...
Questions in other subjects:
Mathematics, 14.12.2020 17:40
Mathematics, 14.12.2020 17:40
