Engineering, 20.03.2020 00:54 raiindrxp

1. Using a typical frequency value for the initiating event and PFD values provided in class lectures, estimate the mishap or consequence frequency for a cooling water failure if the system to be cooled is provided with the following IPLs: (1) Personnel action with a 10 min response time, and (2) A basic process control system (BPCS).

Answers: 2

Show answers

Answers

a basic process control system is necessary as long as the work by the personnel in charge is efficient, this reduces by 90% the errors or failures to calculate the system to operate

Explanation:

Production staff human error

Another reason why a breakdown can occur is due to an error of the production personnel. This error, in turn, can originate from:

Error of interpretation of an indicator during the normal operation of the equipment, which causes the operator or driver of the installation to make the wrong decision

Incorrect performance in the event of a machine failure. For example, introducing water into a hot boiler in which water has been lost visually; as it is not known how much water is inside, it may be empty and hot, so when water is introduced it will produce instant vaporization, with the consequent increase in pressure that can even cause the boiler to explode.

Physical factors of the operator: this may not be in perfect condition to carry out his work, due to dizziness, sleep, fatigue accumulated by long working hours, illness, etc.

Psychological factors, such as demotivation, problems external to work, etc., greatly influence the proliferation of operational errors

Lack of clear systematic instructions, such as procedures, technical instructions, etc., or poor implementation of these Lack of training

Answer from: Quest

the equation above shows how temperature f, measured in degrees fahrenheit, relates to a temperature c, measured in degrees celsius. based on the equation, which of the following must be true?

a temperature increase of 1 degree fahrenheit is equivalent to a temperature increase of

degree celsius.

a temperature increase of 1 degree celsius is equivalent to a temperature increase of 1.8 degrees fahrenheit.

a temperature increase of

degree fahrenheit is equivalent to a temperature increase of 1 degree celsius.

a) i only

b) ii only

c) iii only

d) i and ii only

Answer from: Quest

yes indeed

mayonaise pizza

good

dad gone me

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, danksans7011

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, alexis9263

Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms

Answers: 2

continue

Engineering, 04.07.2019 18:20, samantha636

Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k

Answers: 2

continue

You know the right answer?

1. Using a typical frequency value for the initiating event and PFD values provided in class lecture...