Engineering, 20.03.2020 00:06 heyhowdy
A tension test is carried out on an Al alloy specimen which has an original diameter of 0.505 in and an original gauge length of 2 in. After fracture, the diameter at the fractured neck is measured to be 0.37 in and the gauge length after fracture is 2.32 in. The maximum load during the test was 37 kN whereas at fracture the load was 34 kN.
a. What is the tensile strength?
b. What are the engineering and true stresses at fracture?
c. What are the engineering and true strain at fracture?
d. What is the ductility of this metal?
Answers: 3
Other questions on the subject: Engineering
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10, hadellolo8839
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10, DestyHilBan1183
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
A tension test is carried out on an Al alloy specimen which has an original diameter of 0.505 in and...
Questions in other subjects:
Mathematics, 02.04.2020 23:36
Geography, 02.04.2020 23:37
Mathematics, 02.04.2020 23:37
