Engineering, 19.03.2020 23:56 sophiateaches053

Using shock-expansion theory, calculate the lift and drag (in pounds) on a symmetric diamond airfoil of semiangle epsilon = 15-degrees at an angle of attack to the free stream of 5-degrees when the upstream Mach number and pressure are 2.0 and 2116 lb/ft2, respectively. The maximum thickness of the airfoil is t = 0.5 ft. Assume a unite length of 1 ft in the spanwise direction.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 03.07.2019 15:10, EmilySerna

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

continue

Engineering, 04.07.2019 16:10, TheOriginalMeyah

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Answers: 2

continue

Engineering, 04.07.2019 18:10, leomessifanboy678

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

continue

You know the right answer?

Using shock-expansion theory, calculate the lift and drag (in pounds) on a symmetric diamond airfoil...