Engineering, 18.03.2020 22:32 anayamulay

What are the differences between the standard and modified proctor tests? Name the corresponding ASTMs.2. How many samples do we take from the compacted soil? What is the reason behind taking more than one sample?3. A proctor test has been conducted and it was verified that the relative field compaction is 96.2%. Can we conclude that the in-situ conditions meet the compaction specifications? 4. In the procedures, it is mentioned that the soil would b

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 03:10, lauriepdx17

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

continue

Engineering, 04.07.2019 18:10, bckyanne3

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

continue

Engineering, 04.07.2019 18:10, Talos02

Burgers vector is generally parallel to the dislocation line. a)-true b)-false

Answers: 2

continue

Engineering, 04.07.2019 18:10, colin774

The higher the astm grain size number, the finer the gran is. a)-true b)-false

Answers: 2

continue

You know the right answer?

What are the differences between the standard and modified proctor tests? Name the corresponding AST...