subject
Engineering, 16.03.2020 19:34 alexandria3498

Design a circuit with the following criteria. Assume existence of +3.3V power supply. i. Input signal that operates between Vin = 0V – 5V, and capable of sourcing or sinking 500 x 10^-6 A. ii. Output signal nominally outputs between Vout = 0V – 3.3V, and capable of sinking 10 mA from an external device with an output no more than 0.1 V. Also, sourcing 1mA with an output no less than 3.1V. Hints: • Can use a single transistor. A MOSFET IRLZ34N. • Use datasheet parameters to help design your circuit. • Recall transistors tend to have a pull-up/load resistor or impedance. • Note, the key terms "sourcing" or "sinking" in the problem statement and what they mean. • Try to create scenarios of your transistor circuit. Like, what happens when Vin = 5V, then how do you calculate the rest of your circuit. This will help size your resistors.

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:20, ashleyjaslin
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
image
Engineering, 04.07.2019 18:20, yasyyas646646
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
image
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
image
Engineering, 04.07.2019 19:10, Lexi5170
A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.
Answers: 3
You know the right answer?
Design a circuit with the following criteria. Assume existence of +3.3V power supply. i. Input signa...

Questions in other subjects:

Konu
Social Studies, 20.04.2021 01:40