For a steel alloy it has been determined that a carburizing heat treatment of 10.8 h duration will raise the carbon concentration to 0.310 wt% at a point 1.30 mm from the surface. Estimate the time necessary to achieve the same concentration at a 4.80 mm position for an identical steel and at the same carburizing temperature.

An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.