subject
Engineering, 14.03.2020 19:14 ASTROBOY1

Telonal (1)
A trag tower is to be wed to remove 30% of
the ammonio from an entering air Steam
containing 0.089 mol ammonia lool inert air
at 298k and Tatm. The entering pare How
water is 10kgmol H₂O1hr and the inext air
flow is 18.5 ich mol air/hr.
a Calcalale the composition of frented w and
ased cuater.
b. Plot the operating lines on xy (matraction)
graphs.
valor flow
minimum
e
Calculate
the
theoretical
rate.

ansver
Answers: 2

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, michellerosas
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
image
Engineering, 04.07.2019 18:20, safiyabrowne7594
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
image
Engineering, 04.07.2019 18:20, cxttiemsp021
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
image
Engineering, 04.07.2019 18:20, Doogsterr
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
You know the right answer?
Telonal (1)
A trag tower is to be wed to remove 30% of
the ammonio from an entering air St...

Questions in other subjects:

Konu
Mathematics, 09.04.2021 15:30
Konu
Mathematics, 09.04.2021 15:30
Konu
Chemistry, 09.04.2021 15:30
Konu
Mathematics, 09.04.2021 15:30