Engineering, 14.03.2020 02:43 lekaje2375

A. Choose resistor values R1 and R2so that the DC drain current value is ID1= 100 μA. Assume for this calculation thatλ effects are negligible, i. e., λ≈ 0 V−1. B. For the remaining parts of the problem, consider |λn| = |λp| = 0.01 V−1. It is desired to have the DC output voltage value VO = 5 V. Find the ratio of ID2 to IREF for this case. C. Again considering the DC output voltage value to be VO = 5 V, what is the maximum ac output voltage swing (peak-to-peak) without there occurring significant waveform clipping (i. e., the output voltage range over which Q1 and Q2 remain in saturation)?D. Construct a small-signal equivalent circuit for the amplifier that is appropriate for determining the voltage gain, vo/vi. Clearly identify relevant components and device terminals. E. Solve for the amplifier circuit’s small-signal voltage gain, vo/vi. Begin by writing an expression for the gain, and then determine its value.

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, BardiFan

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Answers: 3

continue

Engineering, 04.07.2019 18:10, aaliyah80

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

continue

Engineering, 04.07.2019 18:10, kevin72836

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

continue

Engineering, 04.07.2019 18:10, tobyhollingsworth178

Which from the following instrument is commonly used to detect the high pitch butzing sound in bearings? [clo4] a)-digital ultrasonic meter b)-infrared camera c)-spectroscopic d)-vibrometer

Answers: 2

continue

You know the right answer?

A. Choose resistor values R1 and R2so that the DC drain current value is ID1= 100 μA. Assume for thi...