Engineering, 13.03.2020 06:01 chumreaper2002

. Consider IREF = 0.25 mA. What is the range of output voltage for which the circuit operates as a small-signal amplifier? (Hint: What should be the region of operation for both devices?)B. If we wish to increase the value of IREF, this can be done by RREF and by R2. C. If IREF is made a factor of 4 greater, by what factor will gm1 change? Justify your answer with a supporting equation. D. If IREF is made a factor of 4 greater, by what factor will the amplifier circuit’s output resistance, Routchange? Justify your answer with a supporting equation. E. If IREF is made a factor of 4 greater, by what factor will the amplifier circuit’s voltage gain, vo/vichange? Justify your answer with a supporting equat

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 03.07.2019 14:10, volleyballfun24

If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.

Answers: 3

continue

Engineering, 04.07.2019 18:10, ayoismeisjjjjuan

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges

Answers: 1

continue

Engineering, 04.07.2019 18:20, 21megoplin

How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s

Answers: 2

continue

Engineering, 04.07.2019 19:20, diawia

Air at a pressure of 1atm and a temperature of 40 c is in parallel flow over the top surface of a flat plate that is heated to a uniform temperature of 120 c. the plate has a length of 0.40m (in the flow direction) and a width of 0.15m. the reynolds number based on the plate length is 50, 000. what is the rate of heat transfer from the plate to the air? if the free stream velocity of the air is doubled and the pressure is increased to 10 atm what is the rate of heat transfer?

Answers: 2

continue

You know the right answer?

. Consider IREF = 0.25 mA. What is the range of output voltage for which the circuit operates as a s...