Consider the freeway in Problem 1. At one point along this freeway there is a 4% upgrade with a directional hourly traffic volume of 5,435 vehicles. If all other conditions are as described in Problem 1, how long can this grade be without the freeway LOS dropping to F?

The Question is incomplete, the complete question is as follows:

Consider the freeway in Problem 1. At one point along this freeway there is a 4% upgrade with a directional hourly traffic volume of 5,435 vehicles. If all other conditions are as described in Problem 1, how long can this grade be without the freeway LOS dropping to F?

A six-lane rural freeway (three lanes in each direction) has regular weekday users and currently operates at maximum LOS C conditions. The base free-flow speed is 65 mi/h, lanes are 11 ft wide, the right-side shoulder is 4 ft wide, and the interchange density is 0.25 per mile. The highway is one rolling terrain with 10% large trucks and buses (no recreational vehicles), and the peak-hour factor is 0.90. Determine the hourly volume for these conditions

Explanation:

Make the assumption Base continuous flow velocity (BFFS)= 65 mph.

Pitch width= 11 ft.

Decrease in lane width pace,fLW= 1.9 mph.

Complete Lateral clearance= 4 ft. Lateral clearance speed reduction, fLC= 0.8 mph.

Complete Width of the Ramp= 0.25 mile.

Velocity reduction proportional to the ramp height, f ID= 0 mph.

Assume lane number to be = 3.

Reduction in speed corresponding to no. of lanes, fN = 3 mph

Free Flow Speed (FFS) = BFFS – fLW – fLC – fN – fID = 65 – 1.9 – 0.8 – 3 – 0 = 59.3 mph

Peak Flow, V veh/hr

Peak-hour factor = 0.90

Trucks = 10%

Rolling Terrain

fHV = 1/ (1 + 0.10 (2.5-1)) = 1/1.15 = 0.8696

fP = 1.0

Peak Flow Rate, Vp = V / (PHV*n*fHV*fP) = V/ (0.90*3*0.8696*1.0) = 0.426V veh/hr/ln

Average speed of vehicles, S = FFS = 59.3 mph

Level of service C

Density of LOS C lies between 18 - 25 veh/mi/ln

Maximum density = 25 veh/mi/ln

Density = Vp /S = 25

0.426V = 25 * 59.3

V = 3480 veh/hr

b) V = 5435 veh/hr

LOS dropping to F

Max density = 45 veh/mi/ln

Density = Vp/S = 45

Vp = 45 * 59.3 = 2668.5 veh/hr/ln

V/(PHF * n * fHV * fP) = 2668.5

fHV = 5435/(0.9*3*2668.5*1.0) = 0.754

1/(1+0.10 (ET -1)) = 0.754

ET = 4.26 ~ 3.5

For 4% upgrade and 10% trucks with ET = 3.5, length of the grade is Greater than 1.0 miles

diy

explanation:

answer:

a

explanation: