subject
Engineering, 12.03.2020 22:43 ineedhelp2285

A flexible pavement was designed to have a 6-inch sand-mix asphaltic surface, 8-inch soil-cement base and a 21-inch crushed stone subbase (all drainage coefficients are 1.0). The pavement was designed for 800 12-kip single axles and 1600 34-kip tandem axles per day in the design direction. The reliability used was 90%, the overall standard deviation was 0.35, initial PSI was 4.7, the TSI was 2.5 and the soil resilient modulus was 2582 lb/in2. If the road has three lanes in the design direction (and was conservatively designed), for how many years was the pavement designed to last?

ansver
Answers: 3

Other questions on the subject: Engineering

image
Engineering, 03.07.2019 14:10, kayabwaller4589
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
image
Engineering, 04.07.2019 19:20, sashajayne8260
Determine the stoichiometric and actual air-fuel ratios and the mole flue gas composition for combustion with 15% excess air for raw indiana, pennsylvania raw coal.
Answers: 3
image
Engineering, 06.07.2019 02:30, Nonniel0v3
An electric motor is used to drive a power press which makes steel turning moment diagrams 323 pressings from a metal sheet. the motor runs at a mean speed of 50 rev/s. the torque required is 10.0nm for 0.2s, followed by 1.0nm for0.3 s with this sequence then being repeated. what is the minimum power required of the motor and the moment of incrtia required for the t1ywhcel if the speed fluctuations are to be restricted to 1.5%?
Answers: 3
image
Engineering, 06.07.2019 03:10, lacourboud20005
An electrical kettle is made out of stainless steel, weighs two pounds (when empty) with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling.
Answers: 1
You know the right answer?
A flexible pavement was designed to have a 6-inch sand-mix asphaltic surface, 8-inch soil-cement bas...

Questions in other subjects: