Engineering, 12.03.2020 18:34 astultz309459

This is a prototype thrust stand used to measure the thrust created by an electric prop motor. The thrust stand has the image below and labels for where the motor and force sensor are placed. The given data is the force measured by a load-cell at the intermediate position on the arm (FMeas). Note that the data are provided in a separate file in the Problem set folder named: 7-P10-Data. xlsx. Use a spreadsheet software (excel or google sheets) to calculate and show plots for both the thrust generated by the motor and the horizontal reaction force at the hinge as a function of time (2 plots). (Hint: in excel/sheets use the equation and fill down features). Distances are in inches, forces are in pounds. US+ Imeas.

Answers: 3

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, xboxdude06

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Answers: 1

continue

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:20, krojas015

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

continue

Engineering, 04.07.2019 19:10, phantomlizz3233

In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?

Answers: 3

continue

You know the right answer?

This is a prototype thrust stand used to measure the thrust created by an electric prop motor. The t...