subject
Engineering, 12.03.2020 17:22 jshu1998

Some of your friends with jobs out West decide they really need some extra time each day to sit in front of their laptops, and the morning commute from Woodside to Palo Alto seems like the only option. So they decide to carpool to work. Unfortunately, they all hate to drive, so they want to make sure that any carpool arrangement they agree upon is fair and doesn’t overload any individual with too much driving. Some sort of simple round-robin scheme is out, because none of them goes to work every day, and so the subset of them in the car varies from day to day. Here’s one way to define fairness. Let the people be labeled S = {p1, . . . , pk}. We say that the total driving obligation of pj would have driven, had a driver been chosen uniformly at random from among the people going to work each day. More concretely, suppose the carpool plan lasts for d days, and on the i-th day a subset Si ⊆ S of the people go to work. Then the above definition of the total driving obligation ∆j for pj can be written as ∆j = P i:pi∈Si 1 |Si| . 1 Ideally, we’d like to require that pj drives at most ∆j times; unfortunately, ∆j may not be an integer. So let’s say that a driving schedule is a choice of a driver for each day — that is, sequence pi1 , pi2 , . . . , pid with pit ∈ St — and that a fair driving schedule is one in which each pj is chosen as the driver on at most d∆je days. (dxe denotes the smallest integer that is greater than or equal to x.)

Prove that for any sequence of sets S1, · · · , Sd, there exists a fair driving schedule.

ansver
Answers: 1

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, lowkeyqueenk
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
image
Engineering, 04.07.2019 18:10, selenamr
Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed. gi) ifn 1, what will happen to the material when transformed material when
Answers: 1
image
Engineering, 04.07.2019 18:10, nandalabella06
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
Some of your friends with jobs out West decide they really need some extra time each day to sit in f...

Questions in other subjects:

Konu
Mathematics, 08.04.2020 18:40
Konu
Chemistry, 08.04.2020 18:40