Consider a spherical tumor of radius rT that is covered with capillaries that provide oxygen at a constant concentration CB. There are no capillaries inside the tumor, where oxygen consumption is constant at a rate of 0.a) Define the system and the environment and include a labeled drawing. b) Identify the source (point of highest concentration) and sink (point of lowest concentration) for the mass transfer process. c) Write a molar balance equation for the appropriate chemical species within the system. Identify which terms can be dropped from the equation (i. e. which terms do not apply for the given scenario).d) Identify which types of boundary conditions should be used for the transport situation. there will be two boundary conditions.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?