Engineering, 11.03.2020 21:27 electronia
Two insulated tanks are connected by a valve. One tank initially contains 0.5 kg air at 80 degree C, 1 bar, and the other contains 1.0 kg of air at 50 degree C, 2 bar. The valve is opened and the two quantities of air are allowed to mix until equilibrium is attained. Employing the ideal gas model with c_v = 0.72 kJ/kg middot K, determine A) The final temperature, in degree C. B) The final pressure, in bar. C) The amount of entropy produced, in kJ/K.
Answers: 1
Engineering, 04.07.2019 18:10, koolgurl2003
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
Engineering, 05.07.2019 19:10, justin20080
Tech a says never use a water hose to clean up dust after a repair. tech b says never use a floor scrubber to clean up dust after repairs. who is correct?
Answers: 1
Engineering, 06.07.2019 02:30, cofran
A75mm diameter shaft is supported in a journal bearing 75mm long with a diametral clearance of 0. 1mm. it supports a radial load of 1000 n and is lubricated with sae 50 oil at 70°c. find the friction torque and the power loss when the crankshaft rotates at 2900 rev/min.
Answers: 1
Two insulated tanks are connected by a valve. One tank initially contains 0.5 kg air at 80 degree C,...
Chemistry, 26.08.2019 05:00
History, 26.08.2019 05:00
Chemistry, 26.08.2019 05:00