An ideal vapor-compression heat pump cycle using R-134a is used to heat a house. The insidetemperature is 22°C, the outside temperature is 0°C. Saturated vapor at 2.2 bar enters thecompressor, saturated liquid leaves the condenser at 8 bar. The mass flow rate is 0.2 kg/s.
Calculate:
(a) the power input to the compressor, in kW.
(b) the coefficient of performance.

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.