Engineering, 10.03.2020 06:05 allysoftball6226

Suppose we have a machine that takes in an infinite stream of bits, one bit at a time. On every input, the machine will output 'O', unless the machine has seen the pattern '10101' in the last five inputs where it will instead output '1'. Below is an example of this behavior. Input: 010101001110110101011... Output: 000001000000000001000

Design a circuit that exhibits the behavior described above, use D-Flip-Flops for memory, and use an encoded state (i. e., fewer flip-flops) design for the state registers. You can also use decoders, encoders, multiplexors, and gates discussed in class. (20 Points)

Answers: 1

Show answers

Other questions on the subject: Engineering

Engineering, 04.07.2019 08:10, doggo242

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

continue

Engineering, 04.07.2019 18:10, bunnles

During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false

Answers: 2

continue

Engineering, 04.07.2019 18:10, soreese02

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

You know the right answer?

Suppose we have a machine that takes in an infinite stream of bits, one bit at a time. On every inpu...