Engineering, 07.03.2020 06:03 ryleepretty
Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that is at [infinity] = 1100°C and maintains a convection coefficient of 250 W/m2·K over the blade. The blades, which are fabricated from Inconel, 20 W/m·K, have a length of 50 mm. The blade profile has a uniform cross-sectional area of 6 × 10-4 m2 and a perimeter of 110 mm. A proposed blade-cooling scheme, which involves routing air through the supporting disc, is able to maintain the base of each blade at a temperature of 300°C.
a. If the maximum allowable blade temperature is 1050 deg. C and the blade tip may be assumed to be adiabatic, is the proposed cooling scheme satisfactory?
b. For the proposed heating scheme, what is the rate at which heat is transferred from each blade to the coolant?
Answers: 1
Other questions on the subject: Engineering
Engineering, 03.07.2019 15:10, brooklyn674
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 03.07.2019 15:10, breannaasmith1122
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
Engineering, 03.07.2019 23:20, abbz13
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
Engineering, 04.07.2019 18:10, viicborella
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
You know the right answer?
Turbine blades mounted to a rotating disc in a gas turbine engine are exposed to a gas stream that i...
Questions in other subjects:
